The casing is made of polymer coated steel plates, internally filled with 10 mm thermal and sound insulation layer of cellular rubber. The front service panel of the casing ensures easy access to the unit internals for maintenance operations including filter replacement and cleaning. The spigots for connection to the air ducts are located at the side of the unit. The unit is supplied with a power cord and a plug for connection to power supply. Compatible with round Ø125 mm air ducts. The unit is equipped with high-efficient external rotor EC motors and centrifugal impellers with forward curved blades for air supply and exhaust. EC motor technologies meet the latest engineering demands for saving energy and for high-efficient ventilation. Low energy demand due to implemented EC technologies. The fan motors are equipped with a built-in thermal overheating protection and ball bearings for a long service life. The unit is equipped with a high-efficient counter-flow polystyrene heat exchanger with a large surface area and high heat recovery efficiency. The air flows are fully separated within the heat exchanger. Odours and contaminants contained in the extract air are not transferred to the supply air flow. Heat recovery is based on extract air heat recovery for warming up of suply air. Extract air transfers most of its heat to the intake air flow. Heat recovery reduces heat losses in cold seasons. In summer the heat exchanger performs reverse and transfers a part of the accumulated coolness from the cooled extract air for cooling down of the intake air. This contributes to better performance of the air conditioner in ventilated premises. The integrated freezing protection system switches the supply fan off in the cold season in case of a freezing danger communicated by the temperature sensor to enable warming of the heat exchanger with the warm extract air flow. When a freezing danger is over the supply fan turns on and the unit reverts to the standard operation mode.
Blauberg UK Freshbox-100 – Single Room Energy & Heat Recovery Unit
£845.61
The casing is made of polymer coated steel plates, internally filled with 10 mm thermal and sound insulation layer of cellular rubber. The front service panel of the casing ensures easy access to the unit internals for maintenance operations including filter replacement and cleaning. The spigots for connection to the air ducts are located at the side of the unit. The unit is supplied with a power cord and a plug for connection to power supply. Compatible with round Ø125 mm air ducts. The unit is equipped with high-efficient external rotor EC motors and centrifugal impellers with forward curved blades for air supply and exhaust. EC motor technologies meet the latest engineering demands for saving energy and for high-efficient ventilation. Low energy demand due to implemented EC technologies. The fan motors are equipped with a built-in thermal overheating protection and ball bearings for a long service life. The unit is equipped with a high-efficient counter-flow polystyrene heat exchanger with a large surface area and high heat recovery efficiency. The air flows are fully separated within the heat exchanger. Odours and contaminants contained in the extract air are not transferred to the supply air flow. Heat recovery is based on extract air heat recovery for warming up of suply air. Extract air transfers most of its heat to the intake air flow. Heat recovery reduces heat losses in cold seasons. In summer the heat exchanger performs reverse and transfers a part of the accumulated coolness from the cooled extract air for cooling down of the intake air. This contributes to better performance of the air conditioner in ventilated premises. The integrated freezing protection system switches the supply fan off in the cold season in case of a freezing danger communicated by the temperature sensor to enable warming of the heat exchanger with the warm extract air flow. When a freezing danger is over the supply fan turns on and the unit reverts to the standard operation mode.
Availability: 1000 in stock
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.